ZyXEL Communications Corporation OX253P Manual De Usuario
Chapter 9 The System Configuration Screens
OX253P User’s Guide
95
9.6 Restart
Click ADVANCED > System Configuration > Restart to reboot the OX253P
without turning the power off.
without turning the power off.
Note: Restarting the OX253P does not affect its configuration.
Figure 37 ADVANCED > System Configuration > Restart
The following table describes the labels in this screen.
9.6.1 The Restart Process
When you click Restart, the the process usually takes about two minutes. Once
the restart is complete you can log in again.
the restart is complete you can log in again.
9.7 Bridge
Click ADVANCED > System Configuration > Bridge to switch the OX253P
between the bridge or router mode. You may need the bridge mode when you
need to use VLAN applications in your network.
between the bridge or router mode. You may need the bridge mode when you
need to use VLAN applications in your network.
Figure 38 ADVANCED > System Configuration > Bridge
Table 34 ADVANCED > System Configuration > Firmware
LABEL
DESCRIPTION
Restart
Click this button to have the device perform a software restart. The
Power LED blinks as it restarts and the shines steadily if the restart is
Power LED blinks as it restarts and the shines steadily if the restart is
successful.
Note: Wait one minute before logging back into the OX253P after a
restart.