ZyXEL Communications Corporation P663HN51 Manual De Usuario
Chapter 20 Settings
P-663HN-51 User’s Guide
176
20.2 Restore Configuration Using the Web
Configurator
Configurator
Click Management > Settings > Update to open the following screen. Use this
screen to upload a new or previously saved configuration file from your computer
to your ZyXEL Device.
screen to upload a new or previously saved configuration file from your computer
to your ZyXEL Device.
Figure 86 Management > Settings > Update
Do not turn off the ZyXEL Device while configuration file upload is
in progress
in progress
You must then wait before logging into the ZyXEL Device again. The ZyXEL Device
automatically restarts causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
automatically restarts causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Figure 87 Temporarily Disconnected
You may need to change the IP address of your computer to be in the same
subnet as that of the ZyXEL Device’s IP address (192.168.1.1). See the appendix
for details on how to set up your computer’s IP address.
subnet as that of the ZyXEL Device’s IP address (192.168.1.1). See the appendix
for details on how to set up your computer’s IP address.
Table 62
Settings File
Name
Name
Type in the location of the file you want to upload in this field or click
Browse... to find it.
Browse... to find it.
Browse...
Click Browse... to find the file you want to upload. Remember that you
must decompress compressed (.ZIP) files before you can upload them.
must decompress compressed (.ZIP) files before you can upload them.
Update
Settings
Settings
Click this to begin the upload process.