ZyXEL Communications Corporation P663HN51 Manual De Usuario
Chapter 21 Logs
P-663HN-51 User’s Guide
181
21.4 Configuring Log Settings
Click Management > System Log > Configure System Log to display the
following screen. Use this screen to configure the level of events to log and where
to send logs.
following screen. Use this screen to configure the level of events to log and where
to send logs.
Figure 91 Management > System Log > Configure System Log
The following table describes the fields in this screen.
Table 64 Management > System Log > Configure System Log
LABEL
DESCRIPTION
Log
This controls whether or not the ZyXEL Device logs events.
Log Level
Select the lowest level of events that you want the ZyXEL Device to log.
The ZyXEL Device logs all events with that severity level or higher.
The ZyXEL Device logs all events with that severity level or higher.
Display Level
Select the lowest level of events that you want the ZyXEL Device to
display. The ZyXEL Device displays events with that severity level or
higher.
display. The ZyXEL Device displays events with that severity level or
higher.
Mode
Select Local to only record events in the ZyXEL Device’s memory. Select
Remote to send events to a remote syslog server. Select Both to record
events in the ZyXEL Device’s memory and send them to a remote syslog
server.
Remote to send events to a remote syslog server. Select Both to record
events in the ZyXEL Device’s memory and send them to a remote syslog
server.
Server IP
Address
Address
Enter the server name or IP address of the syslog server that will log the
selected categories of logs.
selected categories of logs.
Server UDP
Port
Port
Enter the UDP port number the ZyXEL Device is to use when sending
syslog events to the syslog server.
syslog events to the syslog server.
Save/Apply
Click this button to save the changes and have the ZyXEL Device start
using them.
using them.