ZyXEL Communications Corporation PLA4231 Manual De Usuario
Chapter 3 The RESET/ENCRYPT Button
PLA4231 User’s Guide
19
Congratulations. You now have two separate powerline networks as shown above.
If the HomePlug (
) lights on both powerline devices do not light up, the powerline
devices are not connected. Repeat the connection process, making certain you press the
RESET/ENCRYPT buttons for the correct time and within two minutes of each other. If that
does not work see Section 14.5 on page 99 for suggestions.
3.4 RESET/ENCRYPT Button Behavior
The following table summarizes the actions that occur when the RESET/ENCRYPT button is
pressed for specific lengths of time.
pressed for specific lengths of time.
See Troubleshooting in
for suggestions on problems with the RESET/
ENCRYPT button and the lights.
Table 2
Time RESET/ENCRYPT Button is Pressed and Action
TIME
ACTION
POWER LIGHT BEHAVIOR
HOMEPLUG LIGHT
BEHAVIOR
BEHAVIOR
0.5 to 3
seconds
seconds
The device joins a network. It
shares the same network
name as other devices on the
network.
shares the same network
name as other devices on the
network.
The power (
) light blinks
until the device is connected.
This may take a minute.
This may take a minute.
The HomePlug (
) light turns
on if your device is connected
to another powerline device or
a powerline network.
to another powerline device or
a powerline network.
5 to 8
seconds
seconds
The device leaves any
network it is associated with
and its network name
assumes a random value.
network it is associated with
and its network name
assumes a random value.
The power (
) light blinks
several times and then shines
steadily.
steadily.
The HomePlug (
) light blinks
red one time and then turns off
when it disconnects from the
powerline network.
when it disconnects from the
powerline network.
10 to 15
seconds
seconds
Clear all user-entered
configuration information and
return the device to its
factory defaults.
configuration information and
return the device to its
factory defaults.
The power (
) light blinks
several times and then shines
steadily.
steadily.
The HomePlug (
) light blinks
red one time and then turns off
when it disconnects from the
powerline network.
when it disconnects from the
powerline network.