ZyXEL Communications Corporation PLA5236 Manual De Usuario

Chapter 7 Wireless LAN

PLA5236 User’s Guide

The following table describes the labels in this screen.

7.10 WPS Sta tio n Sc re e n

Use this screen when you want to add a wireless station using WPS. To open this screen, click

Ne two rk

Wire le ss LAN 2.4G o r 5G

WPS Sta tio n

tab.

Fig ure 27

Network > Wireless LAN 2.4G or 5G > WPS Station

Table 20 Network > Wireless LAN 2.4G or 5G > WPS

LABEL

DESC RIPTIO N

WPS Setup

WPS

Select

Ena b le

to turn on the WPS feature. Otherwise, select

Disa b le

PIN Code

Select

Ena b le

and click

Apply

to allow the PIN Configuration method. If you select

Disa b le

you cannot create a new PIN number.

PIN Number

This is the WPS PIN (Personal Identification Number) of the PLA.

The PIN is not necessary when you use WPS push-button method.

Click

G e ne ra te

to generate a new PIN number.

WPS Status

Status

This displays

C o nfig ure d

when the PLA has connected to a wireless network using WPS or when

Ena b le WPS

is selected and wireless or wireless security settings have been changed. The

current wireless and wireless security settings also appear in the screen.

This displays

Unc o nfig ure d

if WPS is disabled and there are no wireless or wireless security

changes on the PLA or you click

Re le a se _C o nfig ura tio n

to remove the configured wireless

and wireless security settings.

Release
Configuration

This button is only available when the WPS status displays

C o nfig ure d

Click this button to remove all configured wireless and wireless security settings for WPS
connections on the PLA.

802.11 Mode

This is the 802.11 mode used. Only compliant WLAN devices can associate with the PLA.

SSID

This is the name of the wireless network (the PLA’s first SSID).

Security

This is the type of wireless security employed by the network.

Apply

Click

Apply

to save your changes back to the PLA.

Cancel

Click

C a nc e l

to reload the previous configuration for this screen.