ZyXEL Communications Corporation VMG1312B10A Manual De Usuario
Chapter 6 Broadband
VMG1312-B10A User’s Guide
88
IPv6 Subnet Masking
Both an IPv6 address and IPv6 subnet mask compose of 128-bit binary digits, which are divided
into eight 16-bit blocks and written in hexadecimal notation. Hexadecimal uses four bits for each
character (1 ~ 10, A ~ F). Each block’s 16 bits are then represented by four hexadecimal
characters. For example, FFFF:FFFF:FFFF:FFFF:FC00:0000:0000:0000.
into eight 16-bit blocks and written in hexadecimal notation. Hexadecimal uses four bits for each
character (1 ~ 10, A ~ F). Each block’s 16 bits are then represented by four hexadecimal
characters. For example, FFFF:FFFF:FFFF:FFFF:FC00:0000:0000:0000.
6.1.3 Before You Begin
You need to know your Internet access settings such as encapsulation and WAN IP address. Get this
information from your ISP.
information from your ISP.
6.2 The Broadband Screen
Use this screen to change your Device’s Internet access settings. Click Network Setting >
Broadband from the menu. The summary table shows you the configured WAN services
(connections) on the Device.
Broadband from the menu. The summary table shows you the configured WAN services
(connections) on the Device.
Figure 19
Network Setting > Broadband
The following table describes the labels in this screen.
Table 7
Network Setting > Broadband
LABEL
DESCRIPTION
Add new WAN
Interface
Interface
Click this button to create a new connection.
#
This is the index number of the entry.
Name
This is the service name of the connection.
Type
This shows whether it is an ATM, PTM, or Ethernet connection.
Mode
This shows whether the connection is in routing or bridge mode.
Encapsulation
This is the method of encapsulation used by this connection.
802.1p
This indicates the 802.1p priority level assigned to traffic sent through this connection. This
displays N/A when there is no priority level assigned.
displays N/A when there is no priority level assigned.
802.1q
This indicates the VLAN ID number assigned to traffic sent through this connection. This
displays N/A when there is no VLAN ID number assigned.
displays N/A when there is no VLAN ID number assigned.
IGMP Proxy
This shows whether the Device act as an IGMP proxy on this connection.
NAT
This shows whether NAT is activated or not for this connection.
Default
Gateway
Gateway
This shows whether the Device use the WAN interface of this connection as the system
default gateway.
default gateway.
IPv6
This shows whether IPv6 is activated or not for this connection. IPv6 is not available when
the connection uses the bridging service.
the connection uses the bridging service.