ZyXEL Communications Corporation VSG1435B101 Manual De Usuario

 Chapter 7 Wireless

VSG1435-B101 Series User’s Guide

Use this screen to configure WiFi Protected Setup (WPS) on your ZyXEL Device.

WPS allows you to quickly set up a wireless network with strong security, without 
having to configure security settings manually. Set up each WPS connection 
between two devices. Both devices must support WPS. See 

 for more information about WPS.

Note: The ZyXEL Device applies the security settings of the SSID1 profile (see 

). If you want to use the WPS feature, make sure you 

have set the security mode of SSID1 to WPA-PSK, WPA2-PSK or No Security.

Click Network Settings > Wireless > WPS. The following screen displays. 
Select Enable and click Apply to activate the WPS function. Then you can 
configure the WPS settings in this screen. 

Figure 32   Network Settings > Wireless > WPS

The following table describes the labels in this screen.

Table 17   Network Settings > Wireless > WPS

Enable WPS

Select Enable to activate WPS on the ZyXEL Device.

Method 1

Use this section to set up a WPS wireless network using Push Button 
Configuration (PBC).