ZyXEL Communications Corporation VSG1435B101 Manual De Usuario

Chapter 7 Wireless

VSG1435-B101 Series User’s Guide

Use this screen to configure advanced wireless settings. Click Network Settings 
> Wireless > Others. The screen appears as shown.

 for detailed definitions of the terms listed in this 

screen.

Figure 36   Network Settings > Wireless > Others

The following table describes the labels in this screen. 

Table 21   Network Settings > Wireless > Others

RTS/CTS 
Threshold

Data with its frame size larger than this value will perform the RTS 
(Request To Send)/CTS (Clear To Send) handshake. 

Enter a value between 0 and 2347. 

Fragmentation 
Threshold

This is the maximum data fragment size that can be sent. Enter a value 
between 256 and 2346. 

Auto Channel 
Timer

If you set the channel to Auto in the Network Settings > Wireless > 
General screen, specify the interval in minutes for how often the ZyXEL 
Device scans for the best channel. Enter 0 to disable the periodical scan.

Output Power

Set the output power of the ZyXEL Device. If there is a high density of 
APs in an area, decrease the output power to reduce interference with 
other APs. Select one of the following: 20%, 40%, 60%, 80% or 
100%. 

Beacon 
Interval

When a wirelessly networked device sends a beacon, it includes with it a 
beacon interval. This specifies the time period before the device sends 
the beacon again.

The interval tells receiving devices on the network how long they can wait 
in low power mode before waking up to handle the beacon. This value 
can be set from20ms to 1000ms. A high value helps save current 
consumption of the access point.