ZyXEL Communications Corporation VSG1435B101 Manual De Usuario

Chapter 8 Home Networking

VSG1435-B101 Series User’s Guide

This table allows you to assign IP addresses on the LAN to specific individual 
computers based on their MAC Addresses. 

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC 
address is assigned at the factory and consists of six pairs of hexadecimal 
characters, for example, 00:A0:C5:00:00:02.

Use this screen to change your ZyXEL Device’s static DHCP settings. Click 
Network Settings > Home Networking > Static DHCP to open the following 
screen.

Figure 46   Network Settings > Home Networking > Static DHCP 

The following table describes the labels in this screen.

Apply

Click Apply to save your changes.

Cancel

Click Cancel to restore your previously saved settings.

Table 24   Network Settings > Home Networking > LAN Setup

Table 25   Network Settings > Home Networking > Static DHCP

Add new static 
lease

Click this to add a new static DHCP entry. 

#

This is the index number of the entry.

Status

This field displays whether the client is connected to the ZyXEL Device.

MAC Address

The MAC (Media Access Control) or Ethernet address on a LAN (Local 
Area Network) is unique to your computer (six pairs of hexadecimal 
notation).

A network interface card such as an Ethernet adapter has a hardwired 
address that is assigned at the factory. This address follows an industry 
standard that ensures no other adapter has a similar address.

IP Address

This field displays the IP address relative to the # field listed above.

Modify

Click the Edit icon to have the IP address field editable and change it.

Click the Delete icon to delete a static DHCP entry. A window displays 
asking you to confirm that you want to delete the selected entry.