ZyXEL Communications Corporation VSG1435B101 Manual De Usuario
Chapter 14 IGMP
VSG1435-B101 Series User’s Guide
211
14.3.2 IGMP Service Add
Use this screen to add or edit an IGMP multicast service domain. Click Network
Settings > IGMP Setting > IGMP Filter > Add a new rule to open the
following screen.
Settings > IGMP Setting > IGMP Filter > Add a new rule to open the
following screen.
Figure 85 Network Settings > IGMP Setting > IGMP Filter > Add a new service
The following table describes the fields in this screen.
Table 59 Network Settings > IGMP Setting > IGMP Filter > Add a new service
LABEL
DESCRIPTION
Service Name
Specify a name to identify the IGMP service domain. You can enter up
to 30 characters. You can use letters, numbers, hyphens (-) and
underscores (_). Spaces are not allowed.
to 30 characters. You can use letters, numbers, hyphens (-) and
underscores (_). Spaces are not allowed.
Maximum active
channels for STB
channels for STB
Specify to how many of the service domain’s IGMP channels a LAN STB
device is allowed to subscribe.
device is allowed to subscribe.
Maximum active
channels for
Non-STB
channels for
Non-STB
Specify to how many of the service domain’s IGMP channels LAN
devices other than STBs are is allowed to subscribe.
devices other than STBs are is allowed to subscribe.
Group List
Use this section to specify the multicast groups and subnet masks for
this IGMP service domain.
this IGMP service domain.
Add a group
Click this to add a multicast group and subnet mask to this IGMP
service domain.
service domain.
Group
This column lists the multicast groups and subnet masks for this IGMP
service domain.
service domain.
Modify
Click the Delete icon to delete the entry.
Apply
Click Apply to save your changes back to the ZyXEL Device.
Cancel
Click Cancel to exit this screen without saving.