ZyXEL Communications Corporation WAC5302D-S Manual De Usuario

Chapter 8 AP Profile

NWA / WAC Series User’s Guide

Figure 58   Configuration > Object > AP Profile > SSID > MAC Filter List > Add/Edit MAC Filter Profile 

The following table describes the labels in this screen.  

Layer-2 isolation is used to prevent wireless clients associated with your NWA/WAC from communicating 
with other wireless clients, APs, computers or routers in a network.

Table 50   Configuration > Object > AP Profile > SSID > MAC Filter List > Add/Edit MAC Filter Profile

Profile Name

Enter up to 31 alphanumeric characters for the profile name. This name is only visible in the 
Web Configurator and is only for management purposes. Spaces and underscores are 
allowed.

Filter Action

Select allow to permit the wireless client with the MAC addresses in this profile to connect to the 
network through the associated SSID; select deny to block the wireless clients with the specified 
MAC addresses.

Add

Click this to add a MAC address to the profile’s list.

Edit

Click this to edit the selected MAC address in the profile’s list.

Remove

Click this to remove the selected MAC address from the profile’s list.

#

This field is a sequential value, and it is not associated with a specific user.

MAC

This field specifies a MAC address associated with this profile. You can click the MAC address to 
make it editable.

Description

This field displays a description for the MAC address associated with this profile. You can click 
the description to make it editable. Enter up to 60 characters, spaces and underscores 
allowed.

OK

Click OK to

 

save your changes back to the NWA/WAC.

Cancel

Click Cancel to exit this screen without saving your changes.