ZyXEL Communications Corporation WAP5705 Manual De Usuario
Chapter 3 Easy Mode
WAP5705 User’s Guide
26
3.6.2 WPS
Use this screen to add a wireless station to the network with the WAP5705’s first SSID using WPS.
Click WPS in the Wireless Security to open the following screen.
Click WPS in the Wireless Security to open the following screen.
Figure 15
Wireless Security: WPS
The following table describes the labels in this screen.
Cancel
Click Cancel to close this screen.
WPS
Click this to configure the WPS screen.
You can transfer the wireless settings configured here (Wireless Security screen) to
another wireless device that supports WPS.
another wireless device that supports WPS.
Table 5
Wireless Security
LABEL
DESCRIPTION
Table 6
Wireless Security: WPS
LABEL
DESCRIPTION
Wireless Security
Click this to go back to the Wireless Security screen.
WPS
Create a secure wireless network simply by pressing the button.
The WAP5705 scans for a WPS-enabled device within the range and performs wireless
security information synchronization.
security information synchronization.
Note: After you click the WPS button on this screen, you have to press a similar button in
the wireless station utility within 2 minutes. To add the second wireless station, you
have to press these buttons on both device and the wireless station again after the
first 2 minutes.
have to press these buttons on both device and the wireless station again after the
first 2 minutes.