ZyXEL Communications Corporation WAP5705 Manual De Usuario

 Chapter 7 Tutorials

WAP5705 User’s Guide

Note: At the time of writing, you can only use the WAP5705 in client mode as a wireless 

client to wirelessly connect to a WAP5705 in AP mode.

See 

 for how to connect the client to your AP. If your connection is 

successful, open your Internet browser and enter

 http://www.zyxel.com 

or the URL of any other 

web site in the address bar. If you are able to access the web site, your wireless connection is 
successfully configured.

You can configure more than one SSID on a WAP5705 when it is operating in access point mode. 
This allows you to configure multiple independent wireless networks on the WAP5705 as if there 
were multiple APs (virtual APs). Each virtual AP has its own SSID, wireless security type and MAC 
filtering settings. That is, each SSID on the WAP5705 represents a different access point/wireless 
network to wireless clients in the network. 

Clients can associate only with the SSIDs for which they have the correct security settings. Clients 
using different SSIDs can access the Internet and the wired network behind the WAP5705 (such as 
a printer), but they cannot listen to each other’s traffic.

For example, you may set up three wireless networks (A, B and C) in your office. A is for workers, 
B is for guests and C is specific to a VoIP device in the meeting room.