ZyXEL Communications Corporation WAP6806 Manual De Usuario

 Chapter 3 Repeater Mode

WAP6806 User’s Guide

Use this screen to connect to another AP. Go to Configuration > Network > Wireless LAN 
(2.4G/5G) > WPS to open the following screen.

Note: Wireless clients cannot use WPS to set up a wireless network with the WAP6806 in 

repeater mode. 

IP Alias

This shows the IP address of the WAP6806.

Subnet Mask

This shows the subnet mask of the WAP6806.

AP Connection Status - 2.4G / 5G

MAC Address

This shows the wireless adapter MAC Address of the root AP.

SSID

This shows a descriptive name used to identify the root AP in the wireless LAN. 

Channel

This shows the channel number which you select manually or the root AP automatically 
scans and selects.

Security

This shows the level of wireless security the root AP is using.

Status

This shows the current status of the Wireless LAN.

Wireless Network Information - 2.4G / 5G

MAC Address

This shows the wireless adapter MAC Address of your WAP6806.

Wireless Network

This shows whether the wireless LAN function is enabled or disabled.

SSID

This shows a descriptive name used to identify the WAP6806 in the wireless LAN. 

Link Rate

This shows the data transfer rate of the wireless network.

Current Channel

This shows the channel number which you select manually or the WAP6806 automatically 
scans and selects.

Authentication

This shows the wireless security mode used to protect the information that is sent in the 
wireless network.

Mode

This shows which IEEE 802.1b/g/n wireless networking standards the wireless device 
supports.

WPS Status

This shows the current status of the WPS.

Status Screen: Repeater Mode (continued)