ZyXEL Communications Corporation WAP6806 Manual De Usuario
Chapter 10 Operation Mode
WAP6806 User’s Guide
54
The following table describes the labels in this screen.
You can select the type of Repeater mode: Normal, Ranging, or Speed mode.
The device enables you to extend the range of your dual-band router to eliminate "dead spots" in
your wireless network. You can choose from normal, ranging, or speed modes for both your 2.4GHz
and 5GHz networks.
your wireless network. You can choose from normal, ranging, or speed modes for both your 2.4GHz
and 5GHz networks.
The following terms are used to describe the Repeater mode:
• Up: The connection from the WAP6806 to the Router
• Down: The connection from the WAP6806 to a client
• Down: The connection from the WAP6806 to a client
The following section describes the normal, ranging, or speed modes.
As connection profiles are established, the WAP6806 maintains a record of the varying profiles and
automatically joins the network when in range.
automatically joins the network when in range.
Note: The home wireless network is the initial setup environment. The
WAP6806
does not
have any established network profiles at the time of initial setup.
10.3.2.1 Normal Mode
In Normal mode, both Down and Up are supported for both 2.4 GHz and 5 GHz bands.
Figure 41
Repeater Mode: Normal Mode
Table 20
Maintenance > General
LABEL
DESCRIPTION
Repeater Mode
Select the type of Repeater mode:
Normal - both 2.4G and 5G bands are supported in up and down broadcasting.
Speed - the 5G band is supported on the up behavior, while the 2.4G/5G bands are
supported on the down behavior.
supported on the down behavior.
Ranging - the 2.4G band is supported on the up behavior, while the 2.4G/5G bands are
supported on the down behavior.
supported on the down behavior.
Confirm
Click Confirm to save your changes.
Reset
Click Reset to begin configuring this screen afresh.
Universal
Repeater
Repeater
Client
2.4 GHz / 5 GHz
Up
2.4 GHz / 5 GHz
Down