ZyXEL Communications Corporation WAP7205 Manual De Usuario

 Chapter 6 Wireless LAN

WAP7205 User’s Guide

Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More AP screen. The 
following screen displays.

Figure 18   Network > Wireless LAN 2.4G or 5G > More AP: Edit 

The following table describes the labels in this screen.

Security

This field indicates the SSID profile’s security mode.

Edit

Click the Edit icon to configure the SSID profile.

Table 16   Network > Wireless LAN 2.4G or 5G > More AP

Table 17   Network > Wireless LAN 2.4G or 5G > More AP: Edit

Active

Select this to activate the SSID profile.

Name (SSID)

The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is associated. 
Enter a descriptive name (up to 32 printable characters found on a typical English language 
keyboard) for the wireless LAN.

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a client cannot obtain 
the SSID through scanning using a site survey tool.

Intra-BSS 

Traffic 

blocking

A Basic Service Set (BSS) exists when all communications between wireless clients or between a 
wireless client and a wired network client go through one access point (AP). Intra-BSS traffic is 
traffic between wireless clients in the BSS. When Intra-BSS traffic is enabled, wireless clients can 
access the wired network and communicate with each other. When Intra-BSS traffic is 
disabled, wireless clients can still access the wired network but cannot communicate with 
each other.

Select Enable to prevent crossover traffic from within the same SSID on the WAP7205.

WMM QoS

Check this to have the WAP7205 automatically give a service a priority level according to the 
ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of Service) 
gives high priority to voice and video, which makes them run more smoothly.