ZyXEL Communications Corporation WAP7205 Manual De Usuario
Chapter 6 Wireless LAN
WAP7205 User’s Guide
42
6.11 WPS Station Screen
Use this screen when you want to add a wireless station using WPS. To open this screen, click Network >
Wireless LAN 2.4G or 5G > WPS Station.
Wireless LAN 2.4G or 5G > WPS Station.
Figure 23 Network > Wireless LAN 2.4G or 5G > WPS Station
The following table describes the labels in this screen.
Status
This displays Configured when the WAP7205 has connected to a wireless network using WPS or
when WPS is enabled and wireless or wireless security settings have been changed. The
current wireless and wireless security settings also appear in the screen.
when WPS is enabled and wireless or wireless security settings have been changed. The
current wireless and wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless security
changes on the WAP7205 or you click Release_Configuration to remove the configured
wireless and wireless security settings.
changes on the WAP7205 or you click Release_Configuration to remove the configured
wireless and wireless security settings.
Release
Configuration
Configuration
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the WAP7205.
connections on the WAP7205.
802.11 Mode
This is the 802.11 mode used. Only compliant WLAN devices can associate with the WAP7205.
SSID
This is the name of the wireless network (the WAP7205’s first SSID).
Security
This is the type of wireless security employed by the network.
Apply
Click Apply to save your changes back to the WAP7205.
Cancel
Click Cancel to reload the previous configuration for this screen.
Table 21 Network > Wireless LAN 2.4G or 5G > WPS
LABEL
DESCRIPTION
Table 22 Network > Wireless LAN 2.4G or 5G > WPS Station
LABEL
DESCRIPTION
Push Button
Use this button when you use the PBC (Push Button Configuration) method to configure
wireless station’s wireless settings.
wireless station’s wireless settings.
Click this to start WPS-aware wireless station scanning and the wireless security information
synchronization.
synchronization.
Or input station’s
PIN number
PIN number
Use this button when you use the PIN Configuration method to configure wireless station’s
wireless settings.
wireless settings.
Type the same PIN number generated in the wireless station’s utility. Then click Start to
associate to each other and perform the wireless security information synchronization.
associate to each other and perform the wireless security information synchronization.