ZyXEL Communications Corporation X550NH Manual De Usuario
NBG460N User’s Guide
273
A
P P E N D I X
A
Product Specifications and Wall-
Mounting Instructions
The following tables summarize the NBG460N’s hardware and firmware features.
Table 113 Hardware Features
Dimensions (W x D x H) 190 x 150 x 33 mm
Weight
362g
Power Specification
Input: 120~240 AC, 50~60 Hz
Output: 18 V DC 1A
Output: 18 V DC 1A
Ethernet ports
Auto-negotiating: 10 Mbps, 100 Mbps or 1000Mbps in either half-duplex or
full-duplex mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
full-duplex mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
4-5 Gigabit Port Switch
A combination of switch and router makes your NBG460N a cost-effective
and viable network solution. You can add up to four computers to the
NBG460N without the cost of a hub when connecting to the Internet through
the WAN port. You can add up to five computers to the NBG460N when you
connect to the Internet in AP mode. Add more than four computers to your
LAN by using a hub.
and viable network solution. You can add up to four computers to the
NBG460N without the cost of a hub when connecting to the Internet through
the WAN port. You can add up to five computers to the NBG460N when you
connect to the Internet in AP mode. Add more than four computers to your
LAN by using a hub.
LEDs
PWR, LAN1-4, WAN, WLAN, WPS
Reset Button
The reset button is built into the rear panel. Use this button to restore the
NBG460N to its factory default settings. Press for 1 second to restart the
device. Press for 5 seconds to restore to factory default settings.
NBG460N to its factory default settings. Press for 1 second to restart the
device. Press for 5 seconds to restore to factory default settings.
WPS button
Press the WPS on two WPS enabled devices within 120 seconds for a
security-enabled wireless connection.
security-enabled wireless connection.
Antenna
The NBG460N is equipped with three 2dBi (2.4GHz) detachable antennas
to provide clear radio transmission and reception on the wireless network.
to provide clear radio transmission and reception on the wireless network.
Operation Environment
Temperature: 0º C ~ 40º C
Humidity: 20% ~ 85% RH (Non-condensing)
Humidity: 20% ~ 85% RH (Non-condensing)
Storage Environment
Temperature: -20º C ~ 60º C
Humidity: 20% ~ 90% RH (Non-condensing)
Humidity: 20% ~ 90% RH (Non-condensing)
Distance between the
centers of the holes on
the device’s back.
centers of the holes on
the device’s back.
137 mm
Screw size for wall-
mounting
mounting
M4 Tap Screw