ZyXEL Communications Corporation X550NHV2 Manual De Usuario

 Chapter 22 Tools

NBG-460N User’s Guide

Click Maintenance > Tools > Restart. Click Restart to have the NBG-460N reboot. This 
does not affect the NBG-460N's configuration.

Figure 157   Maintenance > Tools > Restart 

Wake On LAN (WoL) allows you to remotely turn on a device on the network. To use this 
feature the remote hardware (for example the network adapter on your computer) must support 
Wake On LAN using the “Magic Packet” method.

You need to know the MAC address of the remote device. It may be on a label on the device or 
in it’s documentation.

Click Maintenance > Tools > Wake On LAN to use this feature.

"

The NBG-460N can only wake up remote devices that exist in it’s ARP table. 
For the remote device to exist in the NBG-460N’s ARP table it should have 
had a prior connection with the NBG-460N.

Figure 158   Maintenance > Tools > Wake On LAN 

The following table describes the labels in this screen.

Table 109   Maintenance > Tools > Wake On LAN 

Target’s MAC 
Address

Enter the MAC Address of the device on the network that will be turned on. A MAC 
address consists of six hexadecimal character pairs.

Wake up

Click this to turn the specified device on. The status bar will refresh and indicate 
either Ready or MAC Address error.
If it displays Ready you should check if the remote device has turned on.
If the status bar displays MAC Address error it means you may have input the MAC 
Address incorrectly. Make sure you are entering it in the correct format.