Applied Concepts Inc ACMI007 Manual De Usuario
Applied Concepts 011-0131-00 rev 2
Page 41
7.3 Configuration Settings
There are many Speed Sensor configuration settings. Some apply to all Speed Sensors
but others are specific to certain models. All settings for all models are described in
detail in Appendix C where they are organized in the following groups of related function:
but others are specific to certain models. All settings for all models are described in
detail in Appendix C where they are organized in the following groups of related function:
1. Basic Configuration
2. Serial Port Configuration
3. Target Recognition
4. Target Filtering
5. Speed Presentation
6. Locking Targets
7. Speed Alarm
8. Audio
9. TX Power Save
10. Testing
11. System
2. Serial Port Configuration
3. Target Recognition
4. Target Filtering
5. Speed Presentation
6. Locking Targets
7. Speed Alarm
8. Audio
9. TX Power Save
10. Testing
11. System
In Appendix D, all settings are listed in the order of their ID number. The table there
shows all available values for each setting and the factory default value for each model
of Speed Sensor it applies to.
7.4 Changing the Baud Rate
Since the baud rate of the Speed Sensor and the baud rate of the Dashboard application
must be the same for communications to work, use the following steps to change the
baud rate.
must be the same for communications to work, use the following steps to change the
baud rate.
1. Open the Config Settings grid as described above and click on the Serial Port
Configuration tab to see the serial port settings.
2. Change the baud rate to the new desired value and save the setting. At this
point the Speed Sensor and the Dashboard application are still communicating
with the previous baud rate; the baud rate of the Speed Sensor has not changed
yet.
with the previous baud rate; the baud rate of the Speed Sensor has not changed
yet.
3. Turn the Speed Sensor off and back on to complete the baud rate change in the
unit.
4. Configure the Scoreboard application’s baud rate to the new desired value as
described in Section 6.5 above. You may need to close and reopen the
application to complete the process.
application to complete the process.
7.5 Default Settings
There are two types of default values for the Speed Sensors. Factory defaults are hard-
coded into the unit and can not be modified. Configuration File defaults are saved in the
configuration files discussed above. They can be changed in the file and saved for
custom user default values.
coded into the unit and can not be modified. Configuration File defaults are saved in the
configuration files discussed above. They can be changed in the file and saved for
custom user default values.
7.5.1 Factory Defaults
The factory defaults for each setting and each product are listed in Appendix D. To
return all values to their factory defaults, perform the following sequence:
return all values to their factory defaults, perform the following sequence:
•
Turn the Speed Sensor off using the switch on the Programming Box.
•
Press and hold the red Reset button on the box (or ground the AUX pin) while
turning the unit back on.
turning the unit back on.
•
Release the red button after 2 or 3 seconds.