Digigram PCXES Manual De Usuario
LX6464ES
User’s Manual
9
WARNING:
if the firmware of your card requires an update, it will start
automatically at this stage. The update is recommended, it ensures optimal
performances and robustness of the system. The update MUST IN NO CASE BE
INTERRUPTED. If you do so, the card will have to be returned to our After Sales
Service.
performances and robustness of the system. The update MUST IN NO CASE BE
INTERRUPTED. If you do so, the card will have to be returned to our After Sales
Service.
To use the card via the DirectSound interface, you’ll have to configure the devices
you intend to use in the “DirectSound Device Builder” application, which is
launched automatically. One DirectSound stereo device is declared (channels 1
and 2). You can declare additional devices by using the “+” button, then enter the
first channel used by this device, the number of channels, and the name of the
device. A DirectSound device can be multichannel (the application must be able to
manage this type of device). For more details, please refer to the on line help of this
application.
you intend to use in the “DirectSound Device Builder” application, which is
launched automatically. One DirectSound stereo device is declared (channels 1
and 2). You can declare additional devices by using the “+” button, then enter the
first channel used by this device, the number of channels, and the name of the
device. A DirectSound device can be multichannel (the application must be able to
manage this type of device). For more details, please refer to the on line help of this
application.
•
In the “Digigram drivers” window, select the granularity of the data
exchanges between card and driver, as well as the sampling rate of
the audio data. A granularity of 32 samples is the default value.
However, using many I/O channels may require a higher granularity
(maximum recommended is 128 samples). Click on Ok.
exchanges between card and driver, as well as the sampling rate of
the audio data. A granularity of 32 samples is the default value.
However, using many I/O channels may require a higher granularity
(maximum recommended is 128 samples). Click on Ok.
•
Click on the Finish button to complete the driver installation.
Removing the driver under Windows XP and Windows
Server 2003
Server 2003
•
Open the Windows Control Panel and double-click on the
Add/Remove Software icon.
Add/Remove Software icon.
•
Select “Digigram LX6464ES Kit …”, and Change/Remove.
•
Select Remove.
•
Follow the instructions to finish the driver removal.