Garmin International Inc 00726 Manual De Usuario

6

scan through the all the channels, selecting only specifi c 
channels/codes will decrease the scan time. Decreasing scan 
time will help prevent the chances of missing a transmis-
sion. The Scanlist also has Option Menu choices to ‘Scan 
Current Codes’ or ‘Scan All Codes’. Choosing ‘Scan Current 
Codes’ will scan only the Channel and Code combination 
in memory

The ‘Monitor’ option lets you listen to a single channel 

for any activity, including static and weak voice signals. 
The Rino series will automatically squelch a frequency to 
fi lter out unwanted noise. Using the Monitor option will 
temporarily turn off the automatic squelch allowing you 
to hear the open channel. If you see a broken transmission 
symbol (see pg. 9), you may be receiving a signal too weak 
to trigger the unit’s squelch. You might choose this option 
if a signal is getting out of range or weak.

1. Using 

the 

, highlight the ‘Scan’ 

or ‘Monitor’ button and then press the 

 key IN. ‘Scan’ will start searching through the 

available channels. ‘Monitor’ will open the channel 
in order to listen to any radio transmissions on that 
channel.

2.  To stop using either option, highlight the button with 

the 

 and press IN.

2.   To add/remove a channel from the list, highlight 

the channel and press IN on the CLICK STICK to 
add/remove the check mark in from of the name. 
Only channels that are checked will be scanned.

3.   To Select/Clear All channels, highlight either the 

‘Select All’ or ‘Clear All’ buttons and press IN on the 
CLICK STICK.

4.   To ‘Scan All Codes’ or ‘Scan Current Codes’, highlight 

the Options Menu and press IN on the CLICK STICK. 
Choose the desired setting and press IN on the 
CLICK STICK.

190-00284-00_Prelim_FCC.indd   6

9/18/2003, 3:50:49 PM