Garmin International Inc 00726 Manual De Usuario

9

The Informational Picture on the bottom half of screen 

features Garmin’s Mr. Mark Waypoint to show current 
GPS & radio status and radio actions. As you operate the 
unit, the graphics will change depending on what actions 
you are taking or the unit settings.

Four satellites are shown on at the top of the picture 

along with descriptive text to indicate GPS reception 
status. As the unit collects satellite information, the satel-
lite symbols will fl ash alternately until all four are steady 
indicating a 3D position fi x. The more satellites that are 
steady, the better your position fi x.

As radio signals come in, signal wave symbols will 

display to the left of Mark Waypoint. Fragmented (or 
broken) signal symbols are shown to indicate activity on 
that channel. Audio remains muted because the incoming 
signal does not match the squelch code your unit is set to.

The Mark Waypoint fi gure will display several dif-

ferent icons, depending on what you are doing. A radio 
in Mark’s hand indicates the radio is ready to use. A fl ag 
in his other hand means the unit is ready to transmit its 
position (GPS must be On to use this feature.) As you 
transmit, you will see radio waves around Mark’s radio. 
When your peer-to-peer transmission is sent, Mark will 
raise the fl ag in his hand. As positions are received, a fl ag 
will briefl y appear on top of the hill to the left. 

See the following illustrations for more information:

GPS and Radio On;
Ready to transmit Position

GPS and Radio On;
Ready to transmit Position;
Transmitting on FRS

190-00284-00_Prelim_FCC.indd   9

9/18/2003, 3:50:51 PM