Garmin International Inc 01393 Manual De Usuario
Astro
Dog Tracking System Owner’s Manual
3
Settings
Settings
The Settings menu customizes the operation of your
Astro 220.
Customizing the System
To open the System page:
Press
MENU > MENU >
Advanced
>
Settings
>
System
.
GPS–sets the unit to operate in Normal mode,
Battery Saver mode, GPS Off, or Demo Mode.
WAAS/EGNOS–enables or disables WAAS (Wide
WAAS/EGNOS–enables or disables WAAS (Wide
Area Augmentation System) in the US, or EGNOS
(European Geostationary Navigation Overlay
Service).
Battery Type–selects the battery type (alkaline,
Battery Type–selects the battery type (alkaline,
NiMH, or lithium).
External Power Lost–selects whether the
External Power Lost–selects whether the
Astro 220 stays on or turns off when external
power is removed.
•
•
•
•
Proximity Alarms–turns all proximity alarms on or
off.
To restore system defaults and view system
information:
On the System page, press
MENU.
Restore Defaults–restores system settings to their
default settings.
View Card Info–displays the microSD card status.
Mass Storage Mode–allows you to use the
View Card Info–displays the microSD card status.
Mass Storage Mode–allows you to use the
microSD card as a data storage device
Software Version–displays the Astro 220 software
Software Version–displays the Astro 220 software
version, the GPS SW version, and the unit
identification number.
NOTE:
View Card Info
and
Mass Storage Mode
are
available only when a microSD card is installed.
Dog List Setup
To open the Dog List page:
Press
MENU > MENU >
Advanced
>
Settings
>
Dog
List
.
•
•
•
•
•
•