Garmin International Inc 01926 Manual De Usuario

nüvi 2405/2505 Series Owner’s Manual 

65 

The device is connected 

to the computer, but it will 

not go into mass storage 

mode.

Disconnect the USB cable from your computer. 

Turn off the device. 

Plug the USB cable into a USB port on your computer and into your device. 

The device automatically turns on and goes into USB mass storage mode. 

Verify your device is connected to a USB port and not a USB hub. 

I cannot see any new 

removable drives in my list 

of drives.

If you have several network drives mapped on your computer, Windows can have 

trouble assigning drive letters to your device drives. Refer to your operating system 

Help file to learn how to map or assign drive letters. 

My phone will not connect 

to the device.

•  From the main menu, select Tools > Settings > Bluetooth. The Bluetooth field 

must be set to Enabled.

•  Turn on your phone and bring it within 33 feet of the device. 

•  Go to 

My device is not acquiring 

satellite signals

•  Verify the GPS simulator is turned off (

•  From the main menu, select Settings > System > GPS Simulator > Off. 

•  Take your device out of parking garages and away from tall buildings and trees. 

•  Remain stationary for several minutes.

The suction cup will not 

stay on my windshield.

•  Clean the suction cup and windshield with rubbing alcohol. 

•  Dry with a clean, dry cloth. 

•  Mount the suction cup (

The device does not 

charge in my vehicle.

•  Check the fuse in the vehicle power cable (

•  Verify the vehicle is turned on and is supplying power to the power outlet.

•  Your device can only charge between 32°F and 113°F (between 0°C and 45°C). 

If the device is placed in direct sunlight or in a hot environment, it cannot charge. 

My battery does not stay 

charged for very long.

To maximize the time between changes, turn down the backlight (

My battery gauge does not 

seem accurate.

Allow the unit to fully discharge, and fully charge it (without interrupting the charge 

cycle).

How do I know my device 

is in USB mass storage 

mode?

When your device is in USB mass storage mode, a picture of a device connected 

to a computer is shown on the device screen. Also, you should see two new 

removable disk drives listed in My Computer.