Garmin International Inc 0211501 Manual De Usuario
190-01553-01 Rev. 1TP
Garmin GTR 200 Pilot’s Guide
12
GTR 200
BASIC OPERATION
POWER-UP
Turn the GTR 200 on by either turning the
Power/Volume/Squelch knob
clockwise or, if installed, turning on the master switch that powers the radios.
COM RADIO
New frequencies are first selected as a Standby frequency and then toggled
to the Active side with the FLIP/FLOP key. While viewing the Standby
frequency display, use the LARGE and SMALL knobs on the right side of
the GTR 200 to select the desired frequency. Turn the LARGE and SMALL
knobs, clockwise to increase and counterclockwise to decrease frequency
values. Standby frequency selections is not inhibited during transmit.
frequency display, use the LARGE and SMALL knobs on the right side of
the GTR 200 to select the desired frequency. Turn the LARGE and SMALL
knobs, clockwise to increase and counterclockwise to decrease frequency
values. Standby frequency selections is not inhibited during transmit.
When connected to a device that provides nearby frequency information,
nearby station identifiers will be shown for the selected frequency.
Identifier and Type Shown
For The Selected Frequency
Com Frequency Selection
Selecting a Com Frequency:
1)
Turn the LARGE Knob to change the value in one MHz increments.
2)
Turn the SMALL Knob to change the value in 25 kHz increments.
3)
Press the FLIP/FLOP Key to toggle the Standby frequency to the Active
frequency.
frequency.
DRAFT