Garmin International Inc 03408 Manual De Usuario

Select the region you are in.

Select an applicable source, such as FM.

Select 

 repeatedly to move through the tuning modes, and select an

option:
• Select Auto to scan and stop on the next available station.
• Select Manual to select a station manually.
• Select Preset to select a saved station preset.

Select   or   to tune to the station.

Before you can scan for DAB stations, you must connect a compatible DAB

module and antenna (not included) to the stereo. Because DAB signals are

broadcast in select countries only, you must also set the tuner region to a

location where DAB signals are broadcast.

Select the DAB source.

Select   to scan for available DAB stations.
When scanning is complete, the first available station in the first ensemble

found begins playing.
NOTE: After the first scan is complete, you can select   again to re-scan for

DAB stations. When the re-scan is complete, the system starts playing the

first station in the ensemble you were listening to when you started the re-

scan.

Select the DAB source.

If necessary, select   to scan for local DAB stations.

Select   or   to change the station.
When you reach the end of the current ensemble, the stereo automatically

changes to the first available station in the next ensemble.

The FUSION PartyBus networking feature allows you to connect multiple

compatible stereos and zone stereos together on a network, using a combination

of wired or wireless connections.
A FUSION PartyBus device connected to the network can stream sources from

and control media playback on another FUSION PartyBus device connected to

the network.
You can connect up to eight FUSION PartyBus devices on a network.

In the image above, a Apollo 770 stereo 

À

 connects to a wireless router 

Á

 and

to two Apollo SRX400 zone stereos 

Â

. You can connect a FUSION PartyBus

zone stereo to a single speaker zone 

Ã

. You can connect a FUSION PartyBus

stereo to multiple speaker zones 

Ä

 to cover a larger area.

FUSION PartyBus devices connected to the network can stream media from and

control media playback on other devices on the network, but cannot control the

volume of other devices on the network. You can adjust the volume of speakers

or speaker zones connected to the stereo only.
Streaming from a FUSION PartyBus Device on the Network

Before you can stream from a device on the network, you must set up and

configure your FUSION PartyBus devices according to the installation

instructions.

Quick Start Manual

5