Charles Machine Works Inc The TR2I Manual De Usuario
Radiometrix TR2I-464-5-12.5K RF Module Implementation Guide
Purpose: This guide is intended as guidance document to ensure that the radio module
identified is installed implemented in an appropriate manner so as to comply with the conditions
of the original FCC grant and IC certificate.
identified is installed implemented in an appropriate manner so as to comply with the conditions
of the original FCC grant and IC certificate.
Applicability: RF module FCC ID.:
ITQ-TR2I, IC:
3598A-TR2I
Use of External Antennas: The module was certified for use with the following antennas.
These antennas or antennas of the same design but lower gain may be used in the final
installation.
These antennas or antennas of the same design but lower gain may be used in the final
installation.
Antenna Type
Gain
(dBi)
(dBi)
Manufacturer’s
P/N
Manufacturer
¼ Wave Whip
0
EXC450SM
Laird Technologies
Final assembly antenna connection: The final assembly must have non-standard antenna
connection such as a reverse gender connector or means must be provided for permanent
connection of the antenna to the final assembly. A standard rf connector may not be used.
connection such as a reverse gender connector or means must be provided for permanent
connection of the antenna to the final assembly. A standard rf connector may not be used.
Final assembly labeling: The final assembly must contain a label notifying the user that the
device contains a certified rf module that is identified by the following product approval numbers:
device contains a certified rf module that is identified by the following product approval numbers:
FCC ID.:
ITQ-TR2I
IC:
3598A-TR2I
An example of such a label is shown below.