Lexmark International Inc 4062-RF1 Manual De Usuario

Make sure the internal print server is properly installed and that the printer is connected to the network.

Print a network setup page and check that the status shows Connected. If the status is Not Connected, check the

network cables, and then try printing the network setup page again. Contact your system support person to make

sure the network is functioning correctly.

Copies of the printer software are also available on the Lexmark Web site at www.lexmark.com.

Check the cable connections to the printer and print server to make sure they are secure.
For more information, see the setup documentation that came with the printer.

Settings chosen from the software program or application can change or override settings chosen from the printer control

panel. If an option is not functioning, then make sure it is selected in the software as well as the printer control panel.

These are possible solutions. Try one or more of the following:

Turn the printer off, wait about 10 seconds, and then turn the printer on.

Turn the printer off.

Unplug the printer.

Check the connection between the option and the printer.

From the computer you are printing from, select the RFID option.

These are possible solutions. Try one or more of the following:

Open the paper tray.

Check for paper jams or misfeeds.

Make sure paper guides are aligned against the edges of the paper.

Make sure the paper tray closes properly.

Turn the printer off, wait about 10 seconds, and then turn the printer on.

Troubleshooting