Lexmark International Inc 4062-RF1 Manual De Usuario

Note: Do not remove a tray when a job is printing or when the printer control panel indicator light is blinking. Doing so may

cause a jam.

Remove the tray from the printer, and place it on a flat, level surface.

Squeeze the side guide tab, and slide the guide to the outer edge of the tray.

Flex the label sheets back and forth to loosen them, and then fan them. Do not fold or crease the label sheets. Straighten

the edges on a level surface.

Place the label sheets with the print side facing down and the labels positioned at the front of the tray.

Note: When loading labels, leave at least 1 inch of space between the top of the label stack and the top of the drawer.

Overloading may cause paper jams or damage to the labels.

Squeeze the rear guide tab, and slide the guide to the correct position for the size label sheets you are loading.

Insert the tray into the printer.

The increased thickness of RFID labels reduces the capacity of input and output devices. For information on label
construction, see the Card Stock and Label Guide on the Lexmark Web site at www.lexmark.com/publications.

Preparing to print