Lexmark International Inc 5056 Manual De Usuario
Macintosh
23
Installing drivers for local printing
L
e
xm
ar
ar
k Co
nf
id
en
ti
ti
al
u
n
ti
l an
no
un
ced - Re
no
un
ced - Re
vi
si
on:
02
/18
/18
/05
9
Click PORT: <LPT1>, and select the communications port (COM1 or COM2) you want to
use.
use.
10
Click Finish to complete the printer software installation.
Setting parameters in the communications (COM) port
After the printer driver is installed, you must set the serial parameters in the communications port
assigned to the printer driver.
assigned to the printer driver.
The serial parameters in the communications port must match exactly to the serial parameters you
set in the printer.
set in the printer.
1
Click Start
Æ
Settings
Æ
Control Panel, and double-click System.
2
On the Device Manager tab, click + to expand the list of available ports.
3
Select the communications port you assigned to the printer (COM1 or COM2).
4
Click Properties.
5
On the Port Settings tab, set the serial parameters to the exact same serial parameters in
the printer.
the printer.
Look for the printer settings under the Serial Standard (or Serial Option X) heading on the
Menu Settings page you printed earlier.
Menu Settings page you printed earlier.
6
Click OK, and close all the windows.
7
Print a test page to verify printer installation.
a
Click Start
Æ
Settings
Æ
Printers.
b
Select the printer you just created.
c
Click File
Æ
Properties.
d
Click Print Test Page. When a test page prints successfully, printer setup is complete.
Macintosh
Macintosh OS 9.x or later is required for USB printing. To print locally to a USB-attached printer, you
must create a desktop printer icon (Macintosh 9.x) or create a queue in Print Center
(Macintosh OS X).
must create a desktop printer icon (Macintosh 9.x) or create a queue in Print Center
(Macintosh OS X).