Lexmark International Inc 5056 Manual De Usuario

Print another network setup page. Look under the “TCP/IP” heading, and make sure the IP 
address, netmask, and gateway are what you expected. See 

 

if you need help.

Ping the printer, and verify that it responds. At a command prompt on a network computer, 
type 

followed by the new printer IP address (for example, 

).

Note: On Windows computers, click Start

Æ

 Programs

Æ

 Command prompt (or 

Æ

 Command prompt if using Windows 2000).

If the printer is active on the network, you receive a reply.

After you have assigned and verified the TCP/IP settings, you are ready to install the printer on each 
network computer.

For detailed configuration instructions, launch the drivers CD, click View Documentation, and click 
Software and utilities.

In Windows environments, network printers can be configured for direct printing or shared printing. 
Both network printing methods require the installation of a printer driver and the creation of a network 
printer port.

Windows system printer driver

Lexmark custom printer driver

Custom printer driver

System drivers are built into Windows operating systems. Custom drivers are available on the drivers 
CD.

Updated system and custom drivers are available on the Lexmark Web site at www.lexmark.com.

Microsoft Standard TCP/IP port—Windows 2000, Windows XP, and Windows Server 2003

LPR—Windows NT 4.0

Lexmark Enhanced TCP/IP port—Windows 98 SE/Me, Windows NT 4.0, Windows 2000, 
Windows XP, and Windows Server 2003

Printer network ports—Windows 98 SE/Me, Windows 2000, Windows XP, and 
Windows Server 2003