GIGA-BYTE TECHNOLOGY CO. LTD. GN-WB01GS Manual De Usuario

12 

 

and the system will use the Passphrase to create a cipher code in which it will encrypt the 
data. 
 
To use WPA-PSK/ WPA2-PSK: 
 

1. Create a Passphrase, and key it in. Use 8~63 ASCII digits. 

 

2. Remember this Passphrase. If you forget the Passphrase, you will have to do a   

hard reset of the Access Point in order to restore default settings and connect 

again. 

 

3. Click “OK to save these settings. 

 
Clicking Use 802.1X Authentication and then Enter 802.1X configuration from the 
Authentication and Security Window will bring up the 802.1x Setting Window and the 
Certification Tab (see Figure 3-5). 
 
From the Certification screen, you may configure information about authentication, such as 
Tunnel Protocol, ID and Password and Client Certificate or Certificate Chain. (see Figure 
3-5 and 3-7) 
 

 

Figure 3-5.  802.1X Authentication 

 
Description of items in Figure 3-5 is as follows: 
 
Authentication type: PEAP, TLS/Smart Card, TTLS and MD5-Challenge. (Default: 
PEAP) 
 
Session Resumption:

 

This feature can create a new connection without the overhead of 

a full handshake. 
 
Identity: The Account’s User ID. 
 
Password: Passwords for users accounts can be used when LEAP and MD5-Challenge 
are selected as authentication types.