GIGA-BYTE TECHNOLOGY CO. LTD. GN-WS53HN1 Manual De Usuario

24 

 

 

This troubleshooting guide lists questions and possible solutions to some common 
problems which you may encounter while installing or using GIGABYTE Wireless Mini 
Card Adapter. 

 

‹  Cannot Enable 802.1x, WPA or WPA-PSK 
 

z  Windows XP / 2000: 
1. Run the AegisI5.exe file found on the GN-WS53HN1 installation CD. 
2. Click “Install”. 
 
z  Windows 98SE / ME: 
1. Run AegisI2.exe file found on the GN-WS53HN1 installation CD. 
2. Click “Install”. 

 
 

‹  Cannot Establish Connection to a Wireless Network 
 

z  Make sure the SSID for the Wireless Mini Card Adapter is the same as the 

wireless access point or wireless router. 

z  Make sure the security settings are the same as that of wireless access point / 

router. If WEP or WPA encryption is enabled, check if the WEP or WPA keys for 
the GN-WS53HN1 match.   

z  Check that the MAC address of the Wireless Mini-PC Adapter is included in the 

access point/router’s Authorization Table.   

 

 

‹  Can Connect to an Access Point, but Cannot Access the Internet 
 

z  Make sure the security settings are the same as that of wireless access point / 

router. If WEP or WPA encryption is enabled, check if the WEP or WPA keys for 
the GN-WS53HN1 match.   

z  Verify the network settings (IP address, subnet mask, gateway, and DNS) of your 

computer. 

z  Check that the proxy server of the WEB browser is correctly set. 

‹  Poor Link Quality and Weak Signal Strength 
 

z  Keep the Wireless Mini Card Adapter away from microwave ovens and large 

metal objects to avoid radio interference. 

z  Locate the Wireless Mini-PC Adapter as near to the access point as possible.