Risco Ltd. RWT312PR4 Manual De Usuario

Descargar
Página de 64
4  
Installation Instructions 
Installation
 
Introduction 
RISCO Group's wireless PIR outdoor detector, Wireless WatchOUT, is a unique detector with signal 
processing based on two Passive Infrared (PIR) correlated channels. The detector can 
communicate with RISCO Group's ProSYS control panel or other RISCO Group's wireless 
receivers. 
The following instructions describe the installation of the Wireless WatchOUT. For detailed 
information regarding installation, refer to the relevant receiver installation instructions.  
Mounting 
Mounting Considerations 
 
If possible, avoid pointing the detector to 
moving objects (swaying trees, bushes etc.)
 
1m - 2.7m
(3'3" - 8'9")
 
Optional Height: 1m – 2.7m  
(3'3"-8'9") 
Typical Height: 2.2m (7'2") 
Default Lens: Wide angle 12m (40') 90° 
(RL300) 
 
Note: 
1. For low installations, below 1.7m (5'6") in which 
pet immunity is required, use the supplied 
RL300F lens (Low wall or fence installations). 
2. The detector's pet immunity (height of an animal, 
no weight limitation), is up to 70 cm (2'4"), when 
installing the detector at 2.2m (7'2"). If the 
installation is below the height mentioned above, 
the Pet Immunity decreases accordingly; every 
10 cm (4") decrease in installation height leads 
to 10 cm (4") decrease in pet height immunity.  
 
Out of
Detection Range
With moving objects
keep distance of
minimum 5 meters (16')
5m (16')
 
Ensure any objects do not obstruct the field of 
view. Pay attention to growing trees or bushes, 
plants with big moving leaves etc.
 
For installations with extensive vehicle traffic or targets beyond 
the required detection range, it is recommended to tilt the 
detector down. 
Note:  
Tilting the detector down may reduce the pet immunity 
 
 
For optimum detection, select a 
location that is likely to 
intercept an intruder moving 
across the coverage pattern at 
a 45° trajectory.