SMC Networks D3GNV3 Manual De Usuario

錯誤

使用

[

常用

]

索引標籤將

Heading 1

套用到您想要在此處顯示的文字

套用到您想要在此處顯示的文字。

。

176

SMCD3GNV Wireless Cable Modem Gateway User Manual

Testing Connectiv ity to a Destination Address

To test the Gateway’s connectivity to a destination address, perform the following procedure

from the Network Diagnostic Tools menu.

1. Under Test Connectiv ity Results, enter a destination address in the Destination

Address field.

Note: This procedure assumes that the destination address you enter is valid and
operational.

2. Click the TEST CONNECTIVITY button. The Packets Sent and Packets Received

counters show whether packets the number of packets sent and received during the test.

3. To stop the test, click the STOP button.

If the test is successful, you know that the destination you are having difficulty reaching is
alive and physically reachable. If there are routers between the Gateway and the destination
you are having difficulty reaching, the problem might be at one of the routers.

Testing Connectiv ity to an IP Address

To test the Gateway’s connectivity to an IP address, perform the following procedure from

the Network Diagnostic Tools menu.

1. Under Check for IP Address Results, enter an IP address in the IP Address field.

Note: This procedure assumes that the IP address you enter is valid and operational.

2. Click the CHECK FOR IP ADDRESSES button. The Connectivity indicator shows the

results of the test.

3. To stop the test, click the STOP button.

If the test is successful, you know that the IP address you are having difficulty reaching is
alive and physically reachable. If there are routers between the Gateway and the IP address
you are having difficulty reaching, the problem might be at one of the routers.