SMC Networks D3GNV3 Manual De Usuario

錯誤

使用

[

常用

]

索引標籤將

Heading 1

套用到您想要在此處顯示的文字

套用到您想要在此處顯示的文字。

。

SMCD3GNV Wireless Cable Modem Gateway User Manual

Option

Description

Channel Bandwidth

Select a channel bandwidth of 20 or 20/40.

•

20 = allows only single-channel operation (e.g., 20 MHz).

•

20/40 = allows both single channel operation (20 MHz) and the wider bandwidth operation
(40 MHz) by using two or more adjacent (contiguous channels). A 20/40 BSS is a wireless
network that allows a wider bandwidth operation mode. (default)

Guard Interval

The guard interval is the period in nanoseconds that the Gateway listens between packets.
Choices are:

•

Long = 800 ns guard interval.

•

Short = 400 ns guard interval. (default)

MCS

Modulation Coding Scheme (MCS) is a specification of PHY parameters consisting of
modulation order (BPSK, QPSK, 16-QAM, 64-QAM) and FEC code rate (1/2, 2/3, 3/4, 5/6).
MCS is used in the Gateway to define 32 symmetrical settings. MCS provides for potentially
greater throughput. High throughput data rates are a function of MCS, bandwidth, and guard
interval. Default is auto.

Reverse Direction Grant (RDG)

Speeds up data transmission between the Gateway and 802.11n access points and clients by
allowing wireless workstations to send/receive data simultaneously, without contending for
shared medium. Default is enable.

Extension Channel

Defines a second 20-MHz channel. 40-MHz stations can use this channel in addition to using
the control channel simultaneously.

Aggregation MSDUA (A-MSDU)

Enables or disables aggregation of multiple MSDUs in one MPDU. Default is disable.

Auto-Block Ack

Enables or disables Auto Block ACL function. Default is enable.

Decline BA Request

Enables or disables the BA request function. Default is disable.

HT Tx Stream

Select 1 or 2 from the pull-down menu. Default is 2.

HT Rx Stream

Select 1 or 2 from the pull-down menu. Default is 2.

WMM Power Save

When checked, enables the Gateway’s power-management features for optimizing battery
life. Default is checked.

STBC

Space Time Block Coding (STBC) is an 802.11n technique intended to improve the reliability
of data transmissions. With STBC, the data stream is transmitted on multiple antennas, so the
receiving system has a better chance of detecting at least one of the data streams. Choices
are:

•

Disable = Gateway does not transmit the same data on multiple antennas. (default)

•

Enable = Gateway transmits the same data stream on multiple antennas at the same time.

SAVE ADVANCED SETTING button

Click this button to save your changes to the private wireless advanced settings.

WiFi Client Setup Configuration (WP5)

WPS

Lets you enable or disable Wi-Fi Protected Setup (WPS) on the Gateway. Default is disabled.

Security

A read-only field that shows security information.

Encryption

A read-only field that shows the encryption method, if any, used.

WPA Passphrase

A read-only field that shows the WPA passphrase used by the Gateway. The passphrase is a
sequence of words or text that can be used to automatically generate WEP keys.

WPS Configured

A read-only field that whether WPS has been configured.

AP PIN

A read-only field that shows the personal identification number (PIN) for the access point.