SMC Networks D3GN301 Manual De Usuario

錯誤! 尚未定義樣式。 

20 

SMCD3GN2 Wireless Cable Modem Gateway Administrator Manual 

Use the following procedure to configure your computer if your computer has Microsoft 
Windows 2000 installed. 

1.  On the Windows taskbar, click Start, point to Settings, and then click Control Panel. 

2.  In the Control Panel window, double-click the Network and Dial-up Connections icon. If 

the Ethernet adapter in your computer is installed correctly, the Local Area Connection 
icon appears. 

3. Double-click the Local Area Connection icon for the Ethernet adapter connected to the 

Gateway. The Local Area Connection Status dialog box appears (see Figure 5). 

 

4.  In the Local Area Connection Status dialog box, click the Properties button. The Local 

Area Connection Properties dialog box appears. 

5.  In the Local Area Connection Properties dialog box, verify that Internet Protocol (TCP/IP) 

is checked. Then select Internet Protocol (TCP/IP) and click the Properties button. 

6. Click Obtain an IP address automatically to configure your computer for DHCP.  

7. Click the OK button to save this change and close the Local Area Connection Properties 

dialog box. 

8. Click OK button again to save these new changes. 

9.  Restart your computer.