Chamberlain Wireless Products Inc. CWPIR Manual De Usuario
Carton Inventory
Overview
The Wireless Alert Sensor is a Passive Infra-Red
(PIR) sensor that detects movement of people and
vehicles, while allowing small animals to pass through
undetected. Each sensor has its own unique ID, for a
secure radio link. The base station (not provided) can
learn the signals of up to 4 sensors. The base station
gives a single beep for the first sensor that is
programmed, a double beep for the second, and so
on. Additionally, multiple base stations can work with
the same sensor to sound in different places.
(PIR) sensor that detects movement of people and
vehicles, while allowing small animals to pass through
undetected. Each sensor has its own unique ID, for a
secure radio link. The base station (not provided) can
learn the signals of up to 4 sensors. The base station
gives a single beep for the first sensor that is
programmed, a double beep for the second, and so
on. Additionally, multiple base stations can work with
the same sensor to sound in different places.
PIR Motion Sensor
Assembly & Test
Assembly & Test
Step 1
Attach PIR Motion Sensor box to mounting plate with
large silver screw. Tighten screw until PIR Motion
Sensor stays in place when repositioned.
large silver screw. Tighten screw until PIR Motion
Sensor stays in place when repositioned.
Model CWPIR
Wireless Motion Alert Sensor
Passive Infra-Red (PIR) Motion Sensor
1
Swivel Bushing
Mounting Plate
Sun/Rain Shield
®
PIR Sensor
Antenna
Switch Settings
Step 2
Install 4 AA Alkaline batteries (not provided). (Lithium
batteries recommended for colder environments.)
LED light will flash.
batteries recommended for colder environments.)
LED light will flash.
Switch #1
Switch #2
Test
Button
Button
Switch #1:.
Switch #2:
ON
OFF
1
2
OFF Low
Sensitivity
ON
High Sensitivity
(Default)
(Default)
OFF
15' Detection Range
ON
30' Detection Range
(Default)
(Default)
NOTE: To avoid unwanted detection of small animals
move Switch #2 to OFF.
move Switch #2 to OFF.