Lutron Electronics Company Inc 0040 Manual De Usuario
RadioRA
®
Setup Guide for the Entry Master Control
8
Section 2 - Installation
OUTPUTS
INPUTS
1
2
1
2
CCO 1
CCO 2
COM
CCI 2
CCI 1
FLASH
FULL
Installing an Entry Master Control
Installation
Read all instructions completely before installation.
Step 1
Find a suitable location for the
Entry Master Control
Entry Master Control
Place the Entry Master Control in a convenient
and accessible location. Access to input and
output wiring should be considered when
selecting the mounting location.
Note: Entry Master Control must be located
within 30 feet of a Repeater. For optimum Visor
Control range, the Entry Master Control should
be located in or near the garage.
and accessible location. Access to input and
output wiring should be considered when
selecting the mounting location.
Note: Entry Master Control must be located
within 30 feet of a Repeater. For optimum Visor
Control range, the Entry Master Control should
be located in or near the garage.
Step 2
Mount Wall Bracket
Step 3
Wiring to input and output
devices.
devices.
Attach wall bracket to wall using the
supplied screws and wall anchors.
supplied screws and wall anchors.
To Garage
Door Opener 1
Door Opener 1
To Garage
Door Opener 2
Door Opener 2
From Input
Device 2
Device 2
From Input
Device 1
Device 1
From Security
System
System
Note:
• Input devices can be timeclocks, motion sensors,
• Input devices can be timeclocks, motion sensors,
telephone interfaces, etc.
DANGER -
• Do not connect line voltage power to the
• Do not connect line voltage power to the
Entry Master Control.
• Connecting line voltage power or improper
wiring can result in personal injury or damage
to the control or to other equipment.
to the control or to other equipment.
• All external control equipment must maintain
Class 2 isolation.
UP
Common
External Switch
Closures (by
customer)
Closures (by
customer)