HID Global Corporation RPKCL40E Manual De Usuario

An ASSA ABLOY Group brand

© 2016 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS are trademarks or registered trademarks of HID Global, or its licensors, in the U.S. 

and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. 

This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output 

are fictitious. Specifications are subject to change without notice.

RKCL40E, RPKCL40E, RKCLB40E

SRD Model: RPKCL40E, RKCLB40E

iCLASS SE Biometric/iCLASS SE Display

 Biometric Reader

      Proper Usage

Ensure a good quality Contact:

• Do not press too hard
• Do not move during image acquisition
• Leave your finger on the sensor at least 2 seconds
• Do not slide or roll your finger across the sensor

 Cleaning

For optimum performance, it is recommended that the user clean the bio-reader periodically.

The use of a dry cloth is recommended to clean the acquisition surface. 

Caution: Acidic liquids, alcohol or abrasive materials are prohibited. 

In order not to scratch the surface, remove all dust and residue with gentle movements.                     

   

Credential Presentation Best Practices

To ensure a successful read of a card:

1.  Hold card between the thumb and index finger.

2. Present the card so that the index finger creates a spacing between the card and the reader face.  

           Do not place the card flat on the reader.

3. Place the card parallel to the reader form factor. Do not angle to the right or left

4. Place the card parallel to the reader face. Do not angle the card up or down from the reader face.

Acquisition Surface