HID Global Corporation V371 Manual De Usuario

An ASSA ABLOY Group brand

This Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output 

are fictitious. Specifications are subject to change without notice.

© 2015 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS SE are trademarks or registered trademarks of HID Global in the U.S.  

and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. 

Lumidigm® V-Series

V371 Fingerprint Reader

Disclaimer: The V371 Fingerprint Reader, as sold, does not perform match-on-card functionality.  

Match-on-card functionality may be covered by one or more patents owned by third parties, including US Patents RE43,333 and 
RE44,034. The V371 should not be used to perform match-on-card functionality without first determining whether a license is needed 
and obtaining such a license as appropriate.

1  System Requirements

The V371 Software supports the following operating systems: Microsoft Windows® 7/8 (64-bit)*, and Windows  7/8 (32-bit)*
*The Lumidigm Device Service 5.30.xx must be installed in order to run the V371 reader on the PC.
The V371 Demo and V371 Demo source code only supports MIFARE Classic 1K and MIFARE Classic 4K smart cards with default 

support additional smart card types and key values.
Note: Windows XP is not officially supported in this release.  However, 32-bit Windows XP installers are provided for the 

Lumidigm Device Service and the V31x device drivers.  See the Lumidigm Install Guide v5.30.pdf for more information about 
installing onto Windows XP.

2  Installation Instructions

1.

Verify that the logged on user has full administrative privileges.

2.

Verify that the 

User Account Control Settings are set to 

my computer.  If not, right-click on the setup exe’s and select run as administrator.

3.

Make sure you do not have the following Lumidigm sensors plugged into the system during the installation process.

• V31x, M31x, and V371

4.

Uninstall any previous versions of the Lumidigm Device Service.

• If you have version 5.10.32,  5.10.33 or 5.10.34 installed, uninstall the Lumidigm Device Service Packages v5.10.3x.

Note: DO NOT uninstall Lumidigm Device Service Win 7/8 v5.10.3x program. Uninstalling the packages will remove

this program automatically.

• If you are on version 5.00.17 or earlier, uninstall the Lumidigm Device Service Win 7/8 vX.XX.XX where XX.XX.XX is

your version.

5.

Run the LumidigmDeviceServicePackagesSetup_5.30.xx .exe setup (required for the fingerprint scanner embedded in the

V371 reader). To download the most recent software package, see:

http://www.hidglobal.com/developer-center/lumidigm-developer-center

.

• Select Complete install.
• This installer will install the required Windows service and device drivers for the V31x and M31x sensors.

Note: If you uninstall the LumidigmDeviceServicePackages, the V31x and M31x device drivers will also be uninstalled.

This installer only supports Windows 7/8 (32 and 64 bit).

6.

Run the Lumidigm 

V371 VCOM_32-bit_5.30.xx.exe. This installer will install the Lumidigm VCOM Integration Kit along with

the V371 Demo source code and compiled V371 Demo.

7.

Plug the HID Global Lumidigm V371 Fingerprint Reader into the PC.

• The device drivers for the card reader should load automatically
• The device drivers for the fingerprint scanner should load automatically
• In the 

Device Manager, the smart card reader should now display as OMNIKEY 5x21 under the Smart card readers

group.  If it does not display, right-click the device, and select Update Driver Software.

• In the 

Device Manager, the fingerprint scanner should display as a Lumidigm V31x Fingerprint Reader under the

Lumidigm Biometric Sensor group.

8.

Run the compiled version. See the User Guide and 

Section 2: Installation Instructions for more information.

• The compiled version of the V371 demo is installed in 

xx\VCOM-Integration-Kit\bin\install\V371Demo.exe.

Note: This can be run from the Start menu > All Programs > HID Global > Lumidigm Release v5.30.xx > VCOM

Integration Kit 32-bit > V371 Demo.

9.

Build the V371 source code. See 

Section 4: Build the V371 Demo Source Code.

PLT-02470 A.0