Trimble Inc. 10950 Manual De Usuario
Alloy GNSS reference receiver User Guide
25
Charging the Lithium-ion battery
The rechargeable Lithium-ion battery is supplied partially charged. Charge the battery completely
before using it for the first time. If the battery has been stored for longer than three months, charge
it before use.
The internal battery charges fully in 24 hours when connected to a suitable power source.
WARNING –
Charge and use the rechargeable Lithium-ion battery only in strict accordance with the
instructions. Charging or using the battery in unauthorized equipment can cause an explosion or fire,
and can result in personal injury and/or equipment damage.
To prevent injury or damage:
– Do not charge or use the battery if it appears to be damaged or leaking.
– Charge the Lithium-ion battery only within the Alloy receiver. The battery can only be removed by
an authorized Trimble Service Center.
To prevent injury or damage:
– Do not charge or use the battery if it appears to be damaged or leaking.
– Charge the Lithium-ion battery only within the Alloy receiver. The battery can only be removed by
an authorized Trimble Service Center.
Storing the Lithium-ion battery
If you must store a Lithium-ion battery for long periods, make sure that it is fully charged before it is
stored, and that you charge it at least once every three months while it is stored.
Do not allow a battery that is in storage to discharge to below 5 V. A battery that reaches deep
discharge level (5 V or less) cannot be recharged and must be replaced. (To protect a battery that is
in use from deep discharge, the receiver switches power sources or stops drawing power when the
battery pack discharges to 5.9 V.)
All batteries discharge over time when not in use, and they discharge faster in colder temperatures.
Do not store the receiver at temperatures outside the range –40 °C to +70 °C (–40 °F to +158 °F).
The receiver has an internal Lithium-ion battery. The internal battery will only charge from an
external power source that delivers more than 12 volts, for example, an AC power adaptor. The
receiver is supplied with a mains power supply unit that recharges the battery inside the receiver
when it is connected through the adaptor to either of the Lemo ports. When you use the receiver in
a long-term deployment, Trimble recommends that you use this power supply or another that
stored, and that you charge it at least once every three months while it is stored.
Do not allow a battery that is in storage to discharge to below 5 V. A battery that reaches deep
discharge level (5 V or less) cannot be recharged and must be replaced. (To protect a battery that is
in use from deep discharge, the receiver switches power sources or stops drawing power when the
battery pack discharges to 5.9 V.)
All batteries discharge over time when not in use, and they discharge faster in colder temperatures.
Do not store the receiver at temperatures outside the range –40 °C to +70 °C (–40 °F to +158 °F).
The receiver has an internal Lithium-ion battery. The internal battery will only charge from an
external power source that delivers more than 12 volts, for example, an AC power adaptor. The
receiver is supplied with a mains power supply unit that recharges the battery inside the receiver
when it is connected through the adaptor to either of the Lemo ports. When you use the receiver in
a long-term deployment, Trimble recommends that you use this power supply or another that