Trimble Inc. 10950 Manual De Usuario
66
Alloy GNSS reference receiver User Guide
Use the I/O Configuration menu to set up all outputs/inputs of the receiver. The receiver can
output CMR, RTCM, NMEA, GSOF, RT17, RT27, or BINEX messages. These messages can be output
on TCP/IP, UDP, serial, or Bluetooth ports.
output CMR, RTCM, NMEA, GSOF, RT17, RT27, or BINEX messages. These messages can be output
on TCP/IP, UDP, serial, or Bluetooth ports.
This figure shows an example of the screen that appears when you select I/O Configuration / Port
Summary.
Summary.
The Alloy USB port may also be used to access the receiver in USB Device mode. This allows you to
cable your computer to the receiver and browse the internal memory of the receiver as an external
USB device. USB drivers are available from
www.trimble.com
.
Bluetooth menu
Use the Bluetooth menu to configure Bluetooth settings. This figure shows an example of the
screen that appears when you select Bluetooth/Info:
OmniSTAR menu