Trimble Inc. 45145-5800 Manual De Usuario

1 5       Software Utilities

1 6 0      5800 GPS Receiver User Guide

Your 5800 receiver is supplied with the latest version of receiver 
firmware installed. If a later version becomes available, upgrade the 
firmware installed on your receiver.

WinFLASH guides you through the firmware upgrade process. The 
steps required are described below. For more information, refer to the 
WinFLASH Help.

To upgrade the 5800 receiver firmware:

1.

Start WinFLASH. 

The Device Configuration screen appears.

2.

From the Device type list select 5800 Receiver.

3.

From the PC serial port field select the serial (COM) port on 
the computer that the receiver is connected to.

4.

Click 

.

The Operation Selection screen appears. The Operations list 
shows all of the supported operations for the selected device. A 
description of the selected operation is shown in the Description 
field.

5.

Select GPS software upgrade and click 

.

The GPS Software Selection window appears. This screen 
prompts you to select the software that you want to install on 
the 5800 receiver.

6.

Select the latest version from the Available Software list and 
click 

.

The Settings Review window appears. This screen prompts you 
to connect the receiver, suggests a connection method, and then 
lists the receiver configuration and selected operation.

7.

If all is correct, click 

.