Trimble Inc. 45145-5800 Manual De Usuario
5700/5800 GPS Receiver User Guide 4 5
Setting up the Receiver 2
5700 Op
eration
2.7.4
CompactFlash Cards
The 5700 receiver logs data internally on CompactFlash cards.
However, it only supports Type I CompactFlash cards. Trimble
recommends that you use industrial-rated CompactFlash cards, as
commercial cards have a limited operating temperature range.
However, it only supports Type I CompactFlash cards. Trimble
recommends that you use industrial-rated CompactFlash cards, as
commercial cards have a limited operating temperature range.
Before logging data to a CompactFlash card, format the card to ensure
the integrity of the file system. To format the card, insert it in the 5700
receiver and then hold down
the integrity of the file system. To format the card, insert it in the 5700
receiver and then hold down
(5700 keypad front) for 30 seconds.
Note – Make sure that you format your CompactFlash card in the
receiver. This prevents data on the card from being corrupted if the
card is removed while data is being logged. Formatting the card in
your PC may cause data corruption, or loss of data.
receiver. This prevents data on the card from being corrupted if the
card is removed while data is being logged. Formatting the card in
your PC may cause data corruption, or loss of data.
When inserting the card, make sure that it slides into the card slot
properly.
properly.
Warning – If the card does not seat into the pins correctly, do not use
force or you may damage the pins. Remove the card and carefully reinsert
it.
force or you may damage the pins. Remove the card and carefully reinsert
it.