Trimble Inc. 45145-5800 Manual De Usuario
6 Software Utilities
8 4 5700/5800 GPS Receiver User Guide
570
0 O
p
er
atio
n
6.4.2
Upgrading Firmware
Your 5700 receiver is supplied with the latest version of receiver
firmware installed. If a later version becomes available, upgrade the
firmware installed on your receiver.
firmware installed. If a later version becomes available, upgrade the
firmware installed on your receiver.
WinFLASH guides you through the firmware upgrade process. The
steps required are described below. For more information, refer to the
WinFLASH Help.
steps required are described below. For more information, refer to the
WinFLASH Help.
To upgrade the 5700 receiver firmware:
1.
Start WinFLASH.
The Device Configuration screen appears.
2.
From the Device type list select 5700 Receiver.
3.
From the PC serial port field select the serial (COM) port on
the computer that the receiver is connected to.
the computer that the receiver is connected to.
4.
Click
Next
.
The Operation Selection screen appears. The Operations list
shows all of the supported operations for the selected device. A
description of the selected operation is shown in the Description
field.
shows all of the supported operations for the selected device. A
description of the selected operation is shown in the Description
field.
5.
Select GPS software upgrade and click
Next
.
The GPS Software Selection window appears. This screen
prompts you to select the software that you want to install on
the 5700 receiver.
prompts you to select the software that you want to install on
the 5700 receiver.
6.
Select the latest version from the Available Software list and
click
click
Next
.
The Settings Review window appears. This screen prompts you
to connect the receiver, suggests a connection method, and then
lists the receiver configuration and selected operation.
to connect the receiver, suggests a connection method, and then
lists the receiver configuration and selected operation.
7.
If all is correct, click
Finish
.