Trimble Inc. 5580090 Manual De Usuario

2     Features and Functions

16     SPSx50 Modular GPS Receiver User Guide

The receiver provides the following features:

Location GPS – Sub-meter DGPS rover and base station capability

Decimeter accuracy when using RTK corrections by radio link or VRS

OmniSTAR XP/HP for a base station free service

Optional internal 450 MHz (3 frequency bands) radio with transmit and receive 
capability (SPS550 only)

Optional internal 900 MHz radio with transmit and receive capability (SPS550 
only)

WAAS/EGNOS and MSAS Satellite Based Augmentation (SBAS) compatibility

24-channel L1/L2 GPS receiver – Single-frequency GPS for DGPS position 
solution and dual-frequency GPS for OmniSTAR XP/HP and heading solution

Long-life integrated battery, typically 10 hours operation as a base station or 
12 hours as a rover

Integrated display and keypad for rapid system configuration and status 
checking, without the need for a controller 

Integrated Bluetooth wireless technology for cable-free configuration and 
operation with a controller

Ethernet support, so that the receiver can be configured remotely across an 
Ethernet network or the Internet

Attached or external radio antenna option for rover or “High Gain” base station 
operation

Small, lightweight design – 1.65 kg (3.64 lbs) receiver only, with battery

Permanent/semi-permanent and mobile quick setup DGPS base station 
capability

The ability to broadcast corrections through multiple radio links from one base 
station receiver ( for example, through an internal 450 MHz radio and an 
external 900 MHz radio)

Tough aluminum housing

IP67 environmental rating

–40

° C to +65° C (–40° F to +149° F) operating temperature range

9 V to 30 V DC input power range, with over-voltage protection

Two-line, 16-character VFD (Vacuum Fluorescent Display) display