Trimble Inc. 6848090 Manual De Usuario
SNB900 Radio-Modem User Guide 25
Configuration and Installation 3
Editing the port configuration settings
Use the LEMO Port Config menu to change the baud rate and parity
settings for the LEMO port, and the Modem Port Config menu to change
the baud rate and parity settings for the Modem port.
settings for the LEMO port, and the Modem Port Config menu to change
the baud rate and parity settings for the Modem port.
To edit the port configuration settings:
1.
Access the required port configuration menu as described above.
2.
Press the
button or the
button until the Baud rate field is
selected.
B
Tip – A field is editable if it blinks when selected.
3.
To select a different baud rate setting, press the
button or the
button.
4.
To accept the setting for the Baud rate field and move to the
Parity field, press the
Parity field, press the
button.
5.
To select a different parity setting, press the
button or the
button.
6.
To accept the setting for the Parity field, press the
button. The
current port configuration menu is displayed again. No fields are
blinking.
blinking.
7.
To leave this port configuration menu, press the
button again.
Press the
button repeatedly to step from one port configuration
screen to the next. Screens appear in the order LEMO Port Config,
Modem Port Config, Port Config. When you press the
Modem Port Config, Port Config. When you press the
button again,
the Display Config menu screen appears.
30.1
Display Configuration menu
Configure the radio-modem display to switch off (power down) when
appropriate.
appropriate.
B
Tip – To extend the life of the internal battery by approximately 20%, use
the radio-modem with the display switched off.
the radio-modem with the display switched off.