Trimble Inc. 7486-CIRAA Manual De Usuario
BoB Product Requirements Specification
26 February 1999
Trimble Company Confidential
Issue : 1.10
J:\BoB\PRS\BoB PRS110.doc
Issue : 1.10
J:\BoB\PRS\BoB PRS110.doc
10
1.3.4.1
Dual Button Operation
Dual button press (5 seconds)
•
The Dual button press operation resets the configuration of BoB. Performing this operation is a cold boot
of the BoB receiver. It clears any configuration sent from PC-BoB, as well as the current almanac.
of the BoB receiver. It clears any configuration sent from PC-BoB, as well as the current almanac.
1.3.5 Best Mode station tracking
This section has been incorporated into section 3.2.1.1.
1.3.6 Firmware upgrade
Winflash be used as the mechanism to put the firmware onto BoB. Further definition may be as to exactly
what options, but the initial options will be;
what options, but the initial options will be;
•
Wireless enabled
•
Wireless disabled
•
Encoded beacon stations support
1.3.7 Keypad/Display
No display or keypad. All other UI is via the serial port or wireless link. Commands to BoB must be sent via the serial
port, but status can be received on either the link or serial port.
port, but status can be received on either the link or serial port.
Commands and Status are defined in the Software Document.